Kwebbl SIP trunk

No incoming calls after some idle time
If a customer uses a SIP trunk and they cannot receive incoming calls after a certain time being idle, then it is most likely that the firewall is configure...
Fri, 27 Dec, 2019 at 11:42 AM
No outbound calls possible
CLI settings Using the Kwebbl SIP Trunk, please keep in mind that there is no number normalization at the Kwebbl side as you are used to with a SIP device....
Fri, 20 Sep, 2019 at 1:33 PM
Outbound calls are anonymous
If outbound calls are anonymous while you want to send your own CallerID, there are a couple things to check.  1. Is the CallerID set in the PBX also ad...
Fri, 20 Sep, 2019 at 1:48 PM